For AI agents: a documentation index is available at the root level at /llms.txt. Append /llms.txt to any URL for a page-level index, or .md for the markdown version of any page.

Support MediaKind.com Sign in

Guides API Reference

Skip to navigation

Video and Audio Encoding Parameters Encoding

General parameters

Parameter	Description
Export type	Select either IP TV or Internet TV export type.

Was this page helpful?

Blackout parameters

Guides API Reference

Contribution
Beam Essentials UI
- Create a channel
- Create a reception channel
MK.IO Beam for headends
Video and Audio Encoding
Multiplexing
Packaging
Receiving and Decoding
Reception
Reliable Transport
SCTE-35 Rewriting
System Administration
TS Splicing
Advanced interface overview

Welcome to MK.IO Beam
Connect MK.IO Beam to MK.IO
MK.IO Beam Release Notes
Quick start
Contribution
Technical specifications
Configure the feed components
Configure a Reliable Transport service
Configure the Live Encoder service
Configure the Multiplexer service
Configure the Satellite Modulator output
1+1 output synchronization with PTS alignment
Configure NMOS IS-04 and IS-05
Configure SMPTE ST 2110 input
Drop Output On Input Loss
JPEG-XS with Jumbo Frames
Minimize the end-to-end delay for contribution
Set up LPCM and Dolby-E pass-through
Beam Essentials UI
Create a channel
Create a reception channel
MK.IO Beam for headends
MK.IO Beam for headends, high availability controller, distributed workers
Server pair & redundancy
Single server
Tech Specs
Video and Audio Encoding
Advanced Rate Control
Create a new service
Leaky bucket concept
Monitor service statistics
Set up the SDI card for HD or UHD operation
Configure the service general parameters
Configure advanced parameters
Configure the general encoding parameters
Configure blackout
Configure logo insertion
Configure metadata encoding
Configure subtitle burn-in
Configure subtitle encoding
Configure the audio encoding parameters
Configure the video encoding parameters
SCTE-104/IP out-of-band metadata
Configure the input
Configure cross stream prevention
Configure in-band metadata in input stream
Configure out-of-band metadata in input stream
Configure source error management
Configure stream source(s) in input stream
Configure subtitle in input stream
Configure the audio input stream
Configure VANC in input stream
Configure video in input stream
Configure the audio processing parameters
Configure the video processing parameters
True Motion de-interlacing
Configure the output
Manage the output
General configuration parameters
Live service lineup encoding parameters
Output configuration parameters
Audio encoding parameters
Blackout parameters
General parameters
Logo insertion
Metadata encoding parameters
Subtitle encoding parameters
Video encoding parameters
Cross-stream prevention
General parameters
Live source & File source management
Metadata
Source
Source error management
Subtitle
VANC
Video and audio
Audio processing parameters
Video processing
Multiplexing
ASI Card Configuration Tool
Interaction with the deployment on a specific server
Service Monitoring
Bandwidth Policy Group
Configure Regional Statmux
Descriptor
Input source redundancy modes
Output
Remux
Statmux Pool
Transport Stream
Transport Stream Mode For Outputs
Virtual Component
Notes about Multiplexer parameters
Scrambling Tab
Statistical Multiplexing Tab
Stream Processing tab
Packaging
Adding a thumbnail to a Catalog
Advanced Parameters
Configuring Live Packaging services
Enable Packager
HLS or DASH over CMAF specific output settings
HLS over TS specific output settings (HTTP Live Streaming)
HTTPS Packaged Output
Manage catalog, outputs, and thumbnails
Service Monitoring
HLS or DASH over CMAF
HLS over TS
Live packaging parameters
Packager settings
Receiving and Decoding
Parameter descriptions
Configure the decoding
Phase-Aligned Audio
Configure the decryption
BISS Decryption
BISS-CA Decryption
Common Interface Decryption
Director 6
Director 6
Managing BISS-CA entitlements
Transport Stream Input Configuration
Receiver Input Redundancy
Configure the output
3G-SDI Level
Clock reference
Configure audio output
Configure data output
Configure multiple outputs on a service
Configure SDI output
Configure SMPTE ST 2022-6 output
Configure SMPTE ST 2110 output
Configure UHD Video Output
HDR to SDR Conversion
SCTE-35 to SCTE-104
SDR/HDR Signalling
Transport Stream Passthrough
Video Conversion
Reception
Delay modes
SRT input with decode and SDI output
Tech Specs
Configure the feed components
Configure a Reliable Transport service
Configure the Live Encoder service
Configure the Multiplexer service
Configure the Receiver service
Reliable Transport
Interact with an existing Reliable Transport service
Monitoring the Reliable Transport service
Reliable Transport services configuration and management
SCTE-35 Rewriting
Configure connections
Configure input
Configure Notifications
Configure Timings
Manage variables
Operations scheduling view
System Administration
System administration
Third-party software
How to install the MK.IO Beam ISO
Installing Beam on G8 and G9 servers
RAID and FakeRAID configuration
Troubleshooting the ISO installation
Backup and restore
Configuration parameters
Configure health monitoring and remote metrics
Generate a Support Package
Manage alarms
Manage alarms and events
Processing Types
Service settings
Set up SDI/ASI cards
Configure Bonded Network Interfaces
Configure Jumbo Frames
Configure network interfaces
Configure VLAN Interfaces
Control Interface Wizard
How to configure the system clock
Router configuration
Enable customer-signed SSL certificates
LDAP management
User management
Manage failover
Manage servers
TS Splicing
Configure advanced parameters
Configuring Alternate content sources
Configuring content substitution and processing
Configuring the input
General parameters
Output streams configuration
Service Monitoring
Advanced interface overview
Connect to the Controller
Manage services
Manage templates
Menus and navigation
System and architecture description

Platform
mk.io
Beam
Harmonic

© 2025–2026 MediaKind. All rights reserved.