Skip to navigation
Video and Audio EncodingConfigure the service general parametersConfigure the general encoding parameters

SCTE-104/IP out-of-band metadata

Live Encoder supports out-of-band conditioning via SCTE-104/IP, on the same principle as ESAM.

  • Live Encoder can receive conditioning triggers from an external server, using SCTE-104 over IP messages.

  • Once received, SCTE-104 messages are decoded, sent to the targeted channel (based on DPI PID index) and converted in SCTE-35 in order to enable stream conditioning actions.

SCTE-104 out-of-band IP conditioning

Configure SCTE-104/IP out-of-band metadata

Before you start, ensure that you have added and configured the SCTE-104/IP out-of-band metadata in the input stream.

Configuring SCTE-104/IP out-of-band metadata requires multiple steps:

Configure the metadata encoding

  • From the Encoding tab, go to the Metadata encoding section.

  • For each SCTE-104/IP metadata, click in the Actions column then set the Codec to Conditioning.

  • Click Ok to validate.

Configure the video encoding

  • Go to the Video encoding section.

  • For each video stream, select the associated Stream Conditioning.

Example of video configuration

  • Click Ok to validate.

  • Go to the Output tab.

  • Go to the Output streams section, then click either the Add button (if no stream has been selected) or in the Actions column.

  • For each video stream, tick the associated Stream Conditioning.

  • Click Ok to validate. You should see the selected streams in the list of output streams.