> This page is for Beam.

> For clean Markdown of any page, append .md to the page URL.
> For a complete documentation index, see https://mediakind.ferndocs.com/llms.txt.
> For AI client integration (Claude Code, Cursor, etc.), connect to the MCP server at https://mediakind.ferndocs.com/_mcp/server.

# Bandwidth Policy Group

## Configuring Bandwidth Policing Group

* Create a new Multiplexing Service and configure the service settings.

* Configure Transport Stream parameters.

Open the Mux tab to configure total bitrate.

* Open and configure the Output tab:

Set an Output Name.

* Set the output Typeto IP.

* Select the network interface and define the stream address.

* Open the Bandwidth Policing tab and configure the groups:

Click the Add Group button to configure a first group defined with a name and a bitrate.

* Click the Add Group button to configure as many groups as needed defined with specific name and bitrate.

* Assign the Bandwidth Policing Group to an output service to the transport stream.

Click add to create a new output service.

* Set the Service Passthroughmode to On to display specific parameters.

* Select one of the Bandwidth Policing Group previously created.

* Configure the Sources’ Input parameters with the appropriate Network Interface, Destination IP Address and Portnumber.

* Assign the Bandwidth Policing Group to a video component of an output service.

Click add to create a new component to an existing output service.

* Configure the Input tab parameters.

* Open and configure the Output tab and select one of the Bandwidth Policing Group previously created.

* Create and configure any other video component needed with specific Bandwidth Policing Group.

* Click Save and continue to save your modifications.

* Assign a server and start the service.

The service is running and **Bandwidth Policing Group** information (bpgId) are assigned to the service configuration files at both services and component level.

You can also monitor the [**Bandwidth Policing Group** statistics](/beam/multiplexer/monitor#bandwidth-policing) by clicking the  button on the Services page.